Eimsig is a German manufacturer of wireless alarm systems for residential and commercial use. With the seven VDS2465 integration, you can connect your Eimsig alarm system directly to seven and receive automatic SMS or voice call notifications when an alarm is triggered.

Setup

Step 1: Add alarm system in seven

1. Log in to your seven Dashboard
2. Go to Integrations
3. Click Add Integration
4. Select Eimsig as the provider
5. Enter a name (e.g. "Office", "Branch North")
6. Add at least one phone number to be notified when an alarm is triggered
7. Choose per number whether to receive SMS and/or Voice Call notifications
8. Click Add Alarm System
9. Important: Note down the displayed Participant ID and the AES Key

Step 2: Configure Eimsig control panel

Open the configuration of your Eimsig alarm panel under Settings > Security Service and enter the following data:

Field	Value
Transmission	VDS2465
Server Address	116.202.212.88
Server Port	9105
Participant ID (Ident No.)	The Participant ID from Step 1
Encrypted	Yes (check the box)
AES Key	The AES Key from Step 1
AES Key No.	1

For a detailed guide on the security service setup, see the Eimsig Documentation.

How it works

After configuration, your Eimsig alarm system will automatically connect to the seven VDS2465 server. When an alarm is triggered, you will receive an SMS to the registered numbers, e.g.:

[Office] Intrusion alarm (14:23)

The following events are supported:

Event	Description
Armed/Disarmed (external)	System armed/disarmed from outside
Armed/Disarmed (internal)	System armed/disarmed from inside
Intrusion alarm	Intrusion detected (external or internal)
Fire alarm	Smoke detector triggered
Water alarm	Water detector triggered
SOS alarm	Manual emergency call
Fault	General fault, battery, power outage, or jamming

Modify routing

You can change, add, or remove your notification numbers at any time in the seven Dashboard under Integrations. Click the edit icon next to your alarm system.